Andy Chidwick is a good friend and fellow furniture maker. He & his family are currently travelling with The Woodworking Shows. As he travels the country, going from show to show, he is stopping to visit woodworkers along the way and recording interviews. He calls this The Sawdust Tour.
Since Andy lives in western Montana, and had to travel due east to Baltimore for the first show, he had to pass through Billings. I was honored to have him make the American Craftsman Workshop his first stop on the Sawdust Tour.
In this video we talk a little bit about my current projects and how I function in the shop. There are some gold nuggets of information on shop workflow and a peek into my life as a pro woodworker.
While Andy does the interviews, is son Tano is acting as videographer. The endeavor is truly a family event.
It's been a lot of work to get to this point. Since taking a beating from the recession, I took all of the work I could get to recover over the last couple of years. Between working projects out of my shop, working with another contractor, and Rita opening a cafe in downtown Billings, there was not any free time to get out any blogs let alone video.
I have been chomping at the bit to get back to sharing with the woodworking community. Sharing the craft with others has become a passion of mine. I have enjoyed an amazing journey in my own growth of woodworking skills, and I love helping others so that they may enjoy that same growth as well. I also find that sharing has sparked a new level of growth in myself. The woodworking journey never ends!
A Peak Behind The Scenes
Another task that took up my time, was setting up the infrastructure for better video. I recognized that I needed to make some changes in the shop to produce higher quality video. This included adding more light fixtures to increase lumens per square foot and to create even lighting. I went from 44 bulbs to 84. Yes, I nearly doubled my light output (and power consumption.)
Video Lighting Mode
Video Lighting Mode 2
I set the wiring and switches up for "work mode" and "video mode." In work mode I only run the same lights that I always have to provide enough light for working on projects. In video mode I turn on the additional lighting to provide brighter, more even coverage for a better video image.
Replacing Magnetic Ballast I noticed another problem during some test shoots, the old magnetic ballasts created a lot of hum and buzz. So I changed out the last 10 magnetic ballasts for new electronic units. Not only do the lights run silently now, but the start up is much faster. This was a nice improvement.
It is a good thing to have remodeling skills. I have saved myself a good chunk of change being able to do the work myself but it has been a lot of time and effort.
Third Time Is A Charm
Removing Attic LadderThe new lights required a good bit of wiring, and the fixture layout required moving the attic access ladder to a new location. Removing & re-installing the spring loaded attic ladder by myself is something like handling a human size mouse trap. The effort was worthwhile since I found a better location that does not require me to move anything on the floor to drop the ladder. Previously, I had to move my 8" jointer to drop the attic ladder. My shop layout is on plan #3 and so these things happen. I think that I have finally nailed it down this time both on the floor and ceiling layout.
(Clicking on the thumbnails will open larger image.)
I'm A Mac
Other infrastructure upgrades include a new 27" iMac (freaking sweet!) and editing software. I upgraded from iMovie, which I think is a great program, to Final Cut Pro X. FCPX is waaay more powerful and with that power comes a new level of complexity.
Just like with woodworking, you can read or watch tutorials on the subject all you want, but it's only by doing will you really understand the craft. I was going to do a shop tour, but it turned into a simple look around the shop with a movie preview theme for fun. It's short but it was an exercise for me to try out the new capabilities of FCPX.
Stay tuned, there will be more videos coming from the American Craftsman Workshop as I continue supporting the woodworking community!
I have been anxious to get the cameras out and do some more video so I did an update from the American Craftsman Workshop.
Thanks to the following guys for helping me get my own site started. It is a work in progress at the moment, but they really helped me figure a lot of things out sooner than later.
Video review for Scott Morrison instructional DVD's
Videos on Sale!Savings of 15% offered by Scott Morrison at Finewoodworker.com. You will save on instructional videos, templates, and the new butterfly joint kit. This offer ends at the March 31st so be sure to get in on the savings.
Scott's has a variety of videos and templates that will teach you how to build furniture inspired by Sam Maloof. He breaks the process down into comprehensive, easy to follow steps so that you can be successful building these pieces in your own shop.
Watch the video to see why the savings code is "Captain Clippinger."
